IMS 2023

At the recent International Microwave Symposium (IMS) 2023 in San Diego, CA, a joint panel session between Women in Microwaves and Young Professionals discussed what they need...

The MG36271A covers 9 kHz to 70 GHz to meet the needs of emerging extremely high-frequency designs.

Analog Devices’ wideband Apollo MxFE front-end SiP, which covers 0.5 to 55 GHz, is software-definable to address a plethora of applications.

IMS’s exhibits, product launches, and technical sessions combine to provide a glimpse into the future.

At a reinvigorated International Microwave Symposium, the industry flexes its muscle and points to a bright future.

Noisecom's programmable noise generator, equipped with a broadband noise source and noise-path attenuator, is a platform that can evaluate a receiver's "road-worthiness" in the...

MathWorks’ Wireless Waveform Generator allows users to create, impair, and export modulated 5G waveforms.

SV Microwave’s QuarterBack connectors use a quarter-turn bayonet style nut with a locking feature for standard SMP interfaces.

The VCA has been added as a virtual instrument in the arsenal of Astronics' ATS-3100 radio test set for mission-critical RF testing.

Developed by Analog Devices, the mixed-signal platform brings flexibility and speed to intelligent-edge design while simplifying electronic test.

At IMS, Microchip Technology tested and compared measurements between a miniature atomic clock and a chip-scale atomic clock using its 53100A phase-noise analyzer.

With Tektronix's SignalVu-PC software, the company’s 5 and 6 Series B MSO oscilloscopes can perform RF spectral and modulation analysis of multiple channels.

Digitally tunable filters, a mmWave radio development kit, and an active phased-array antenna module will be demonstrated in Otava’s and partners’ booths at IMS.

Thermal management can make or break 5G base stations. According to NXP, top-side cooling can help prevent them from overheating.

For proper operation, high-frequency circuits require PCB materials with appropriate performance and characteristics.

Anokiwave's devices help network operators more quickly implement mmWave 5G radios for every 3GPP FR2 band, and point satellite-communications designers toward successful deployments...

The series of GaN HEMT PAs is designed to optimize output power and linearity in high-data-rate communications waveforms without sacrificing efficiency.

The company is extending its reach into higher-frequency devices, such as PAs, LNAs, and gain blocks up to 100 GHz, in an effort to break into new markets such as defense and ...

The highly integrated FEM brings high performance in terms of power, power-added efficiency, and bandwidth to defense-related applications.

The new multiplexers are said to provide longer operational life, faster speeds, and higher bandwidths than electromagnetic relay alternatives.

The electromagnetic simulation startup comes to IMS to showcase its products that are tuned to the modeling of large-scale antennas and radar.

The milestone gain-block MMIC, along with a companion device, covers a frequency range of 17 to 29.5 GHz. Both draw a minuscule 10 mA.

Startup’s diverse line of gallium-nitride devices will be on display at IMS 2023.

Keysight's vector component analyzer and mmWave signal analyzer enable Nokia Bell Labs to better characterize component performance for 6G D-band comms and E-band backhaul systems...

Are you an RF genius? Find out at Rohde & Schwarz’s IMS 2023 booth and catch demos of numerous test products.

Filtronic's second-generation active diplexer follows the first-generation launch at IMS 2022.

With their optimized output power, gain, and power-added efficiency over their respective frequency ranges, this trio of solid-state power amplifiers supports the growing industry...

When combined with a tablet or smartphone, IMS Connector Systems' SmartMod-based connectors offer continuous measurement of temperature, humidity, voltage, and other parameters...

Guerrilla RF’s GaAs pHEMT amplifiers provide additional degrees of freedom for RF/microwave designs.

Quantum computing requires particular qualities in interconnects. Connectronics can modify its products to fit the bill.

There's lots of good reasons to hit IMS 2023 in San Diego. What's your main reason?

Regarded as the flagship event dedicated to the RF and microwave world, IMS 2023 returns to beautiful San Diego in June with a host of technical sessions, workshops, boot camps...