Low-Capacitance Varistors Protect Antennas, Data Lines

June 16, 2008
The AntennaGuard Series of low-capacitance multilayer varistors (MLVs) has been expanded to include a sub-1-pF version. Designed to provide a one-chip means of protecting high-speed digital interfaces, RF antennas, and RF amplifier circuits against ESD ...

The AntennaGuard Series of low-capacitance multilayer varistors (MLVs) has been expanded to include a sub-1-pF version. Designed to provide a one-chip means of protecting high-speed digital interfaces, RF antennas, and RF amplifier circuits against ESD events, the bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss. The low-profile 0402 MLV responds quickly to ESD and can withstand successive 1-k strikes at 8 kV (IEC 610004-2).

In addition, the MLV minimizes parasitic capacitance and signal distortion even as it maximizes signal strength and speed. Initial offerings of the AntennaGuard sub-1-pF include 0.8-pF capacitance at 10-V and 15-V rating in a 0402 case size.

www.avx.com

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...