Design Fortifies Type N Receptacles

April 16, 2009
San-tron has introduced an UG-58 A/U Type N panel receptacle with single-piece body construction capable of reliable performance from DC to 11 GHz. The rugged connectors are manufactured with a custom machine as part of an automated process, for low cost ...
San-tron has introduced an UG-58 A/U Type N panel receptacle with single-piece body construction capable of reliable performance from DC to 11 GHz. The rugged connectors are manufactured with a custom machine as part of an automated process, for low cost but excellent electrical performance. The one-piece body construction results in smooth signal transfer at a nominal impedance of 50 Ohms. The panel receptacles are rated for operating voltages to 1000 V RMS and feature a maximum dielectric withstanding voltage of 2500 V RMS at sea level and 60 Hz power line frequency. The Type N panel receptacles are designed for a temperature range of -65C to +165C and meet interface standards in accordance with MIL-STD-348.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...