Multi-Tap Attenuators Control 1 To 10 dB

April 6, 2009
Attenuation switching functions usually call for multiple attenuator devices. The MTAQ1225 multi-tap attenuator vows to eliminate this need while conserving board space and inventory costs. Constructed using high-stability, thick-film resistor ...

Attenuation switching functions usually call for multiple attenuator devices. The MTAQ1225 multi-tap attenuator vows to eliminate this need while conserving board space and inventory costs. Constructed using high-stability, thick-film resistor elements on alumina, these single-chip devices are available in four standard attenuation values of 1, 3, 6, and 10 dB. The VSWR for all four values is less than 1.50:1 with attenuation tolerance of 0.5 dB or 10 percentwhichever is greater. P&A: under $1.90 each in production quantities; stock to eight weeks.

State Of The Art, Inc., 2470 Fox Hill Rd., State College, PA 16803-1797; (800) 458-3401, Internet: www.resistor.com.

Sponsored Recommendations

Wideband MMIC LNA with Bypass

June 6, 2024
Mini-Circuits’ TSY-83LN+ wideband, MMIC LNA incorporates a bypass mode feature to extend system dynamic range. This model operates from 0.4 to 8 GHz and achieves an industry leading...

Expanded Thin-Film Filter Selection

June 6, 2024
Mini-Circuits has expanded our line of thin-film filter topologies to address a wider variety of applications and requirements. Low pass and band pass architectures are available...

Mini-Circuits CEO Jin Bains Presents: The RF Engine of the 21st Century

June 6, 2024
In case you missed Jin Bains' inspiring keynote talk at the inaugural IEEE MTT-S World Microwave Congress last week, be sure to check out the session recording, now available ...

Selecting VCOs for Clock Timing Circuits A System Perspective

May 9, 2024
Clock Timing, Phase Noise and Bit Error Rate (BER) Timing is critical in digital systems, especially in electronic systems that feature high-speed data converters and high-resolution...