Mwrf 279 Fig01 1 1

Coax Terminations Span DC To 18 GHz

Oct. 20, 2011
A line of precision terminations includes models capable of coverage as broad as DC to 18 GHz. For example, model T-180 is rated for 10 W average power and 1 kW peak power from DC to 18 GHz, with 1.10:1 VSWR to 1 GHz, 1.20:1 VSWR to ...
A line of precision terminations includes models capable of coverage as broad as DC to 18 GHz. For example, model T-180 is rated for 10 W average power and 1 kW peak power from DC to 18 GHz, with 1.10:1 VSWR to 1 GHz, 1.20:1 VSWR to 12.4 GHz, and 1.30 VSWR to 18 GHz. These 50-Ω coaxial terminations are available with a wide range of connector types, including male or female Type N, SMA, TNC, and BNC connectors (depending upon frequency range).

RLC Electronics
83 Radio Circle Mount Kisco, NY 10549
(914) 241-1334
FAX: (914) 241-1753
e-mail: [email protected]
www.rlcelectronics.com

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...