Four-Way Divider Conquers 3 GHz

Sept. 23, 2010
Model DL42030 is the latest addition to a line of power dividers/combiners and couplers from TRM Microwave for applications from 20 to 3000 MHz. Model DL42030 is a four-way power divider with 2.25-dB insertion loss and typical isolation of 25 dB. The ...

Model DL42030 is the latest addition to a line of power dividers/combiners and couplers from TRM Microwave for applications from 20 to 3000 MHz. Model DL42030 is a four-way power divider with 2.25-dB insertion loss and typical isolation of 25 dB. The input return loss is 14 dB and the output return loss is 18 dB. The divider features outstanding phase balance of +/-2 deg. The four-way divider measures 2.5 x 1.18 x 0.5 in. with female SMA connectors standard. It is designed for operating temperatures from -55 to +125 deg. C; military screening options are available upon request.

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...