Standalone LXI Digitizers Boast High Resolution

Jan. 26, 2009
DESIGNED FOR WAVEFORM ANALYSIS, the L4532A two-channel digitizer and L4534A four-channel digitizer offer simultaneous sampling to 20 MSamples/s with 16-b resolution. These digitizers include isolated input channels that can measure up to 250 V. The ...

DESIGNED FOR WAVEFORM ANALYSIS, the L4532A two-channel digitizer and L4534A four-channel digitizer offer simultaneous sampling to 20 MSamples/s with 16-b resolution. These digitizers include isolated input channels that can measure up to 250 V. The LXI digitizers are specifically aimed at applications that require electromechanical device control for product test or characterization. They include on-board "scope-like" measurements, such as Vmin/Vmax, Vp-p, frequency, and rise/fall time, that can be applied to a selected portion or the overall waveform. On-board measurements save post-processing time and minimize the need to transfer and store large amounts of data. The Agilent L4532A and L4534A include USB 2.0 and Gigabit Ethernet interfaces. In addition, they can be remotely operated from any browser by connecting to the built-in web page. P&A: $6500 for the L4532A and $8500 for the L4534A; available now.

Agilent Technologies, Inc., 5301 Stevens Creek Blvd., Santa Clara, CA 95051; (408) 345-8886, FAX (408) 345-8474, Internet: www.agilent.com.

See associated figure

About the Author

Nancy Friedrich | RF Product Marketing Manager for Aerospace Defense, Keysight Technologies

Nancy Friedrich is RF Product Marketing Manager for Aerospace Defense at Keysight Technologies. Nancy Friedrich started a career in engineering media about two decades ago with a stint editing copy and writing news for Electronic Design. A few years later, she began writing full time as technology editor at Wireless Systems Design. In 2005, Nancy was named editor-in-chief of Microwaves & RF, a position she held (along with other positions as group content head) until 2018. Nancy then moved to a position at UBM, where she was editor-in-chief of Design News and content director for tradeshows including DesignCon, ESC, and the Smart Manufacturing shows.

Sponsored Recommendations