Sangshin Elecom Serves Up WiMAX Filters

March 22, 2007
Sangshin Elecom has developed a line of monoblock filters well suited for 3- and 5-GHz WiMAX applications. The filters, which are available with a wide range of center frequencies and passbands from 2.3 to 6.0 GHz, provide improved electrical performance ...

Sangshin Elecom has developed a line of monoblock filters well suited for 3- and 5-GHz WiMAX applications. The filters, which are available with a wide range of center frequencies and passbands from 2.3 to 6.0 GHz, provide improved electrical performance compared to low-temperature-cofired-ceramic (LTCC) components with better reliability than coupled-resonator designs. An example is model MBP33R3550S100A, which provides a 100-MHz bandwidth centered at 3550 MHz. The filters are available from Sangshin's exclusive distributor in the United States, RFMW Ltd. at: http://www.rfmw.com/

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.