Mwrf 507 Fig01 5 0

RF Resistor Tackles 400 W

Feb. 16, 2012
The model G400B50W5 high-reliability flanged RF resistor from Anaren is now available from Richardson RFPD. This rugged, 400-W device features brazed construction and all beryllium-oxide (BeO) ceramic composition. The 50-Ω ...

The model G400B50W5 high-reliability flanged RF resistor from Anaren is now available from Richardson RFPD. This rugged, 400-W device features brazed construction and all beryllium-oxide (BeO) ceramic composition. The 50-Ω resistor is supplied with gold-plated copper leads and a non-nichrome resistive element. It can handle 400 W RF power. Reliability is ensured by subjecting the rugged resistor to 500,000 on/off cycles.

RICHARDSON RFPD, 40W267 Keslinger Rd., PO Box 307, LaFox, IL 60147-0307; (630) 208-2700, FAX: (630) 208-2662, e-mail: [email protected], www.richardsonrfpd.com.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.