Hybrid Coupler Connects 8.5 GHz

June 24, 2010
Model IPP-7044 is a 3-dB 90-deg. hybrid coupler from Innovative Power Products that operates from 6000 to 8500 MHz. It can combine two signals with power levels totaling 100 W CW in a component measuring only 0.2 x 0.4 in. The surface-mount hybrid ...

Model IPP-7044 is a 3-dB 90-deg. hybrid coupler from Innovative Power Products that operates from 6000 to 8500 MHz. It can combine two signals with power levels totaling 100 W CW in a component measuring only 0.2 x 0.4 in. The surface-mount hybrid coupler has less than 0.4 dB insertion loss and less than 1.30:1 VSWR. The isolation between ports is better than 17 dB. The coupler features amplitude balance of 0.35 dB and phase balance of 6 deg.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...