Using Wi-Fi Access Points to Determine Position

Feb. 11, 2022

Deeyook is working with Wi-Fi chip vendors to make it possible to determine device position via triangulation.

Related To:

This video appeared on Electronic Design and has been published here with permission.

Location, location, location. That tends to describe property values, though it's also critical to the Internet of Things (IoT).

Communication is useful, but knowing where a device or sensor is located can be invaluable information. Global positioning systems (GPS) provide this type of information using satellites and special receivers. However, it doesn't work well indoors and there are some limits outdoors, too.

Deeyook is working with Wi-Fi chip vendors to make it possible to determine device position via triangulation. I spoke with Gideon Rottem, CEO and Founder at Deeyook, about the company's technology and how it works.

Deeyook's patented wireless-based firmware uses self-learning AI technology to provide location information with a precision of about 10 cm. It requires support in Wi-Fi access points and delivers absolute position information indoors and outdoors as long as suitable access points are nearby.

Links

About the Author

William G. Wong | Senior Content Director

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.>

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.