Mwrf 2505 Soundwaves 0
Mwrf 2505 Soundwaves 0
Mwrf 2505 Soundwaves 0
Mwrf 2505 Soundwaves 0
Mwrf 2505 Soundwaves 0

Using Sound Waves to Analyze MIMO

Oct. 26, 2016
Low-cost audio speakers and sound waves were used to model the effects of multipath propagation on MIMO wireless communications systems.

Wireless communications systems must often overcome multipath propagation as part of different operating environments, and it is no different for systems equipped with multiple-input, multiple output (MIMO) antenna setups. Multipath results from radio waves bouncing off walls, buildings, and other objects between a transmitter and receiver. Studying the effects of multipath radiation is fairly straightforward with a single transmit antenna and receive antenna. However, it becomes proportionally more complex with MIMO—radio waves move between multiple antenna elements from the transmitter to the receiver and then additional beams come from reflections.

To help understand the possible multipath conditions in different radio environments, Luis Mendo of the Technical University of Madrid developed a way to study multipath in MIMO systems using sound waves from inexpensive audio speakers. By capturing sound with microphones at a mock “receiver,” it then becomes possible to analyze the multipath effects with the aid of a popular math-based, PC software program.

Many of the exhibitors and visitors at the recent EDI CON 2016 in Boston spoke hopefully of their future roles in supplying components, test equipment, and engineering solutions for future Fifth-Generation (5G) wireless communications networks. Although standards have yet to be formulated for 5G wireless networks, most developers agree that MIMO techniques must handle the large amounts of data representing greater numbers of wireless communications systems users demanding more voice, video, and data communications. Use of sound instead of radio waves to experiment with different MIMO concepts provides a practical means of exploring the spatial effects of various environments and operating conditions on MIMO techniques.

One such MIMO technique is spatial multiplexing. By including multiple antennas at a transmitter and receiver, it is possible to use different beams to increase the amount of data carried between the two antennas. The authors note the two main conditions for successful MIMO spatial multiplexing: the transmitted beams should point in sufficiently different directions so that they do not overlap, and the multipath environment should provide a large number of obstacles whereby the transmitted beams can arrive at the receiver from directions that are sufficiently separated to avoid overlap. Sound waves help to simplify the analysis of an operating environment for the potential use of MIMO in a wireless network.

The test equipment is actually quite available, consisting of a pair of laptop computers with audio capabilities that are used as a receiver and a transmitter. A pair of loudspeakers is placed at the transmitter; they need not be of particularly good quality. The transmitter processing and sound generation is done with the aid of MathWorks’ MATLAB simulation software. The receiver has a pair of microphones that pick up the transmitted sound waves and use a standard sound editor for recording. The saved audio files are read and analyzed with the help of MATLAB software. The test equipment for this audio version of MIMO analysis is simple and low-cost, and provides surprisingly comprehensive analysis of almost any operating environment.

See “Illustrating MIMO Transmission by Means of Sound Waves,” IEEE Antennas & Propagation Magazine, Vol. 58, No. 4, August, 2016, p. 90.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...