Filtronic
Filtronic Ims Promo

Active Diplexer and E-band Amplifier Enhance Long-Range Communications

June 1, 2023
Filtronic's second-generation active diplexer follows the first-generation launch at IMS 2022.

This article is part of our IMS 2023 coverage.

Two new product ranges—Taurus, a high-power E-band amplifier, and Hades X2, a next-generation active diplexer—will be showcased by Filtronic in IMS Booth 315.

The Taurus amplifier provides a highly linear mmWave power boost and typical PSAT of 38 dBm. The Hades X2 active diplexer delivers a typical PSAT of 30 dBm and sports dual high-power amplifiers. It also boasts a pair of performance-matched gallium-arsenide (GaAs) MMICs that are power-combined in a waveguide to deliver maximum power and linearity. The Hades X2 launch follows the launch of the first generation of Hades products at IMS 2022.

For more information, visit the company's website.

For more IMS 2023 coverage, visit our digital magazine.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.