Front-End Module Serves AMR Systems

April 6, 2012
 

Model RF6559 is an integrated transmit/receive front-end module for use in 915-MHz automated-metering-system (AMR) applications. It helps reduce the circuit-board size by minimizing the number of required external components. It features a three-stage power amplifier with 42 dB gain from 902 to 928 MHz and typical output power of +28 dBm over that same frequency range. The module includes a pair of single-pole, double-throw (SPDT) switches that allow transmission and reception with a single antenna. It is housed in a 28-pin, 6 x 6 mm laminate package.

RF Micro Devices
7628 Thorndike Rd.
Greensboro, NC 27409-9421
(336) 678-5570
e-mail: [email protected]

Sponsored Recommendations

Wideband MMIC LNA with Bypass

June 6, 2024
Mini-Circuits’ TSY-83LN+ wideband, MMIC LNA incorporates a bypass mode feature to extend system dynamic range. This model operates from 0.4 to 8 GHz and achieves an industry leading...

Expanded Thin-Film Filter Selection

June 6, 2024
Mini-Circuits has expanded our line of thin-film filter topologies to address a wider variety of applications and requirements. Low pass and band pass architectures are available...

Mini-Circuits CEO Jin Bains Presents: The RF Engine of the 21st Century

June 6, 2024
In case you missed Jin Bains' inspiring keynote talk at the inaugural IEEE MTT-S World Microwave Congress last week, be sure to check out the session recording, now available ...

Selecting VCOs for Clock Timing Circuits A System Perspective

May 9, 2024
Clock Timing, Phase Noise and Bit Error Rate (BER) Timing is critical in digital systems, especially in electronic systems that feature high-speed data converters and high-resolution...