Bandpass Filter Screens 915 MHz

Nov. 19, 2013

This rugged filter provides low loss for passband signals from 902 to 928 MHz.

Download this article in .PDF format
This file type includes high resolution graphics and schematics when applicable.

Model AB915B475 is a cavity bandpass filter with a center frequency of 915 MHz and passband of 902 to 928 MHz. It exhibits passband insertion loss of only 1.5 dB, with passband ripple of less than ±0.2 dB. The filter achieves out-of-band signal rejection of more than 45 dB across the lower rejection band from 850 to 894 MHz, as well as across the upper rejection band from 936 to 950 MHz. The return loss is better than 20 dB across the passband. The bandpass filter measures 60 x 120 x 48 mm and is supplied with female Type-N connectors.

Anatech Electronics Inc., 70 Outwater Lane, P.O. Box 2217, Garfield, NJ 07026; (973) 772-4242, FAX: (973) 772-4646.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.