SAW Filter Passes 1090 MHz

Sept. 2, 2010
Model AM1090S816 is a surface-acoustic-wave (SAW) bandpass filter from Anatech Electronics with center frequency of 1090 MHz. It offers a total passband around the center frequency of 1084 to 1096 MHz with insertion loss of 5.3 dB. The 50-Ohm filter ...

Model AM1090S816 is a surface-acoustic-wave (SAW) bandpass filter from Anatech Electronics with center frequency of 1090 MHz. It offers a total passband around the center frequency of 1084 to 1096 MHz with insertion loss of 5.3 dB. The 50-Ohm filter provides typical out-of-band rejection of 52 dB from 500 to 924 MHz, 58 dB from 924 to 944 MHz, and 39 dB or more from 944 to 1061 MHz. The filter can operate at temperatures from -40 to +85 deg.C. It measures 3.8 x 3.8 x 1.4 mm and is designed to handle input power levels to +20 dBm.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...