Power Divider Muscles 250 W

Sept. 26, 2012
Model 2372A-2 is a two-way power divider from Narda Microwave-East, an L-3 Communications Co., that is designed for large loads: as much as 250 W CW power from 0.5 to 2.5 GHz.

Model 2372A-2 is a two-way power divider from Narda Microwave-East, an L-3 Communications Co., that is designed for large loads: as much as 250 W CW power from 0.5 to 2.5 GHz. It can handle as much as 2 kW peak power across the full frequency range. The power divider boasts amplitude balance of ±0.25 dB and phase balance between signal paths of ±5 deg. Suitable for commercial and military applications, it measures a mere 3.5 x 2.5 x 1.0 in. with Type N female connectors. It exhibits less than 0.6 dB insertion loss, yet provides at least 13-dB port-to-port isolation from 500 to 700 MHz and 18-dB isolation from 0.7 to 2.5 GHz. The power divider has less than 1.50:1 VSWR across its frequency range.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...