Coupler Directs 800 to 2500 MHz

Sept. 12, 2012
Model AM1650DC836 is a compact coaxial directional coupler from Anatech Electronics designed for applications from 800 to 2500 MHz.

Model AM1650DC836 is a compact coaxial directional coupler from Anatech Electronics designed for applications from 800 to 2500 MHz. It suffers only 0.5-dB insertion loss over that span, with 13-dB nominal coupling and 20-dB directivity. The directional coupler provides 40-W power-handling capability in a housing measuring just 4.2 x 1.4 x 0.9 in. with Type N male or female connectors. It exhibits 1.20:1 maximum VSWR and achieves -140-dBc intermodulation-distortion (IMD) performance from -30 to +60°C.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...