Broadband Amplifier Spans 18 To 26.5 GHz

Oct. 5, 2009
A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is ...

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Page Title

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Page Title

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024
Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024
Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024
Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...