SMT Divider Clocks To 28 GHz

    Jan. 21, 2010
    Model HMC791LC4B from Hittite Microwave is a surface-mount frequency divider with simultaneous divide-by-2 and divide-by-4 outputs, with capability to handle clock input signals to 28 GHz. Input signals are terminated with 50 Ohms to ground on-chip and ...

    Model HMC791LC4B from Hittite Microwave is a surface-mount frequency divider with simultaneous divide-by-2 and divide-by-4 outputs, with capability to handle clock input signals to 28 GHz. Input signals are terminated with 50 Ohms to ground on-chip and may be either AC or DC coupled. Outputs can be differential or single-ended with peak-to-peak drive levels to 600 mV. The divider exhibits single-sideband (SSB) phase noise of -151 dBc/Hz with typical rise and fall times of 12 and 14 ps, respectively. It is supplied in a RoHS-compliant 4 x 4 mm ceramic surface-mount-technology (SMT) package and draws only 200 mA from a single -+3.3-VDC supply.

    About the Author

    Jack Browne | Technical Contributor

    Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

    Continue Reading

    Sponsored Recommendations