Spectrum Analyzer Scours 9 kHz to 8 GHz

Jan. 31, 2007
MetricTest is offering RF/microwave test equipment from Advantest in the United States. One of the Advantest instruments is the model U3751 spectrum analyzer, with a frequency range of 9 kHz to 8 GHz. The analyzer features resolution-bandwidth filters ...

MetricTest is offering RF/microwave test equipment from Advantest in the United States. One of the Advantest instruments is the model U3751 spectrum analyzer, with a frequency range of 9 kHz to 8 GHz. The analyzer features resolution-bandwidth filters ranging from 100 Hz to 3 MHz and video-bandwidth filters from 10 Hz to 3 MHz. It can detect signal levels from the displayed average noise floor (DANL) through +30 dBm; the DANL is better than -122 dBm without the built-in preamplifier and better than -139 dBm with the built-in preamplifier turned on. The preamplifier covers a frequency range of 10 MHz to 8 GHz. For more on this and other Advantest spectrum analyzer and RF/microwave measurement equipment, visit the MetricTest web site at: http://www.metrictest.com/

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.