Fast Synthesizer Tunes 2 To 18 GHz

Dec. 20, 2006
The second generation of a compact frequency synthesizer from Wide Band Systems is well suited for measurement applications. The agile source tunes from 2 to 18 GHz in 1-MHz steps (other resolutions are available) with 3-microsecond typical switching ...

The second generation of a compact frequency synthesizer from Wide Band Systems is well suited for measurement applications. The agile source tunes from 2 to 18 GHz in 1-MHz steps (other resolutions are available) with 3-microsecond typical switching speed. The output power across the full frequency range is +10 dBm and spurious outputs are -50 dBc or less. Phase noise is typically -90 dBc/Hz offset 1 kHz from a 10-GHz carrier, -107 dBc/Hz offset 100 kHz from a 10-GHz carrier and -121 dBc/Hz offset 1 MHz from the same carrier. For more information on this agile synthesizer, visit the firm's website, at

http://www.widebandsystems.com/

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.