ngpromo.jpg

G/ATOR System Tracks Multiple Targets

March 1, 2017
Extensive testing of the G/ATOR radar system has demonstrated its capability to detect and track multiple types of rocket, artillery, and mortar rounds simultaneously.
The AN/TPS-80 Ground/Air Task-Oriented Radar (G/ATOR) system has been impressive in its capabilities of tracking multiple projectiles over long distances.

Early results on the performance of the AN/TPS-80 Ground/Air Task-Oriented Radar (G/ATOR) system have been impressive (see photo). During recent testing by system designer Northrop Grumman Corp. and the U.S. Marines, the ground weapon locating radar (GWLR) was evaluated for its capability to detect and track multiple types of rocket, artillery, and mortar (RAM) rounds simultaneously.

More than 700 live shots were fired, and the radar system was used to track multiple weapons in over 40 different weapons scenarios. In fact, it successfully detected projectiles at distances between 6 and 50 km, including volley fire in rapid sequences.

“GWLR mode detects and tracks time-critical incoming threats, calculates an approximate impact point, and then tracks the threat’s trajectory back in time to estimate a firing position, allowing counterfire forces to engage rapidly,” said Roshan Roeder, vice president for mission solutions at Northrop Grumman. “The volley fire capability that G/ATOR demonstrated is critical on the modern battlefield, and all of the data collected during IIE indicates that GWLR can exceed the U.S. Marine Corps’ range capability.”

The G/ATOR system employs software that allows it to track and identify projections, whether with a 360-deg. scan in a focused sector. The versatile multiple-mission system is designed to replace a number of legacy U.S. Marine Corps radar systems.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...