Synergy Releases 8-to-9-GHz VCO

Nov. 8, 2007
Synergy Microwave Corp. has announced the model DXO810900-10 surface-mount voltage-controlled oscillator (VCO) with a tunable frequency range of 8100 to 9000 MHz. It delivers at least -2 dBm output power across that range, with typical harmonics of -35 ...

Synergy Microwave Corp. has announced the model DXO810900-10 surface-mount voltage-controlled oscillator (VCO) with a tunable frequency range of 8100 to 9000 MHz. It delivers at least -2 dBm output power across that range, with typical harmonics of -35 dBc and typical phase noise of -84 dBc/Hz offset 10 kHz from the carrier. The VCO exhibits typical tuning sensitivity of 15 to 78 MHz/V for tuning voltages of 0.5 to 24.0 V. It draws a maximum of 35 mA current from a +10-VDC bias supply. For more information on the surface-mount VCO, visit the Synergy site at: http://www.synergymwave.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.