LNA Gains 18 To 22 GHz

Dec. 16, 2010
The model AMF-5F-18002200-17-10P is a low-noise amplifier (LNA) from MITEQ with maximum noise figure of 1.7 dB from 18 to 22 GHz. It provides 40 dB gain across its bandwidth, with worst-case gain flatness of +/-1.5 dB and typical gain flatness of +/-0.75 ...

The model AMF-5F-18002200-17-10P is a low-noise amplifier (LNA) from MITEQ with maximum noise figure of 1.7 dB from 18 to 22 GHz. It provides 40 dB gain across its bandwidth, with worst-case gain flatness of +/-1.5 dB and typical gain flatness of +/-0.75 dB. The amplifier, which is supplied in a housing that is only 16 mm long and 8 mm high with field-replaceable K connectors, delivers at least +10 dBm output power at 1-dB compression with typical third-order intercept of +20 dBm . The amplifier draws 180 mA maximum current from a single +15-VDC supply.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...