GaN HEMT Transistors Designed For 5-GHz WiMAX Applications

June 16, 2008
Two new gallium nitride (GaN) HEMT transistors from Cree Inc. are for use in WiMAX applications covering the 4.9- to 5.8-GHz frequency band. The new CGH55015F and CGH55030F transistors, which are in sample release, are specified to operate at up to 5.8 ...

Two new gallium nitride (GaN) HEMT transistors from Cree Inc. are for use in WiMAX applications covering the 4.9- to 5.8-GHz frequency band. The new CGH55015F and CGH55030F transistors, which are in sample release, are specified to operate at up to 5.8 GHz.

As business and residential customers continue to demand increased capacity and functionality for wireless networks, these transistors can enable efficient power amplifiers in small base-station formats (access points) for last mile service utilizing WiMAX-based architectures. Such outdoor units can allow Internet service providers to maximize their ROI on spectrum due to the ability to offer tiered services (enabled by improved quality of service and wider channel bandwidths) to hundreds of broadband users from a single access point.

Potential benefits offered by the new 15- and 30-watt devices include:

1. A four-fold increase in efficiency compared with similar power level GaAs MESFET devices

2. Elevated frequency operation compared with commercially available silicon LDMOS

3. Operational capability in the license-exempt 5.8-GHz ISM (industrial, scientific and medical) band as well as the 5.3- and 5.47-GHz U-NII (Unlicensed National Information Infrastructure) bands

4. Linearity of better than 2.5% EVM at average power under a WiMAX signal at 25% drain efficiency covering an instantaneous bandwidth of 5.5 to 5.8 GHz.

Both transistors are available with reference design amplifier platforms.

www.cree.com

Sponsored Recommendations

MMIC Medium-Power Amplifier Covers 6 to 12 GHz

Nov. 11, 2024
Mini-Circuits is a global leader in the design and manufacturing of RF, IF, and microwave components from DC to 86GHz.

RF Amplifier and Filter Testing with Mini-Circuits Power Sensors

Nov. 11, 2024
RF power sensors are essential for accurately measuring RF components like filters and amplifiers, focusing on parameters such as insertion loss and gain. Employing instruments...

High-Frequency Modules to 110 GHz

Nov. 11, 2024
Mini-Circuits’ wide selection of high-frequency modules are designed, assembled and tested in-house by the best talent in the industry at our Deer Park Technology Center. The ...

Defense Technology: From Sea to Space

Oct. 31, 2024
Learn about these advancements in defense technology, including smart sensors, hypersonic weapons, and high-power microwave systems.