I/Q Modulator Ranges 18 to 21.5 GHz

Nov. 9, 2006
Designed for applications from 18.0 to 21.5 GHz, model M2V-82N-5JX is a high-dynamic-range in-phase/quadrature (I/Q) vector modulator with 360-deg. control for generating complex digital modulation in communications systems. Based on PIN diode ...

Designed for applications from 18.0 to 21.5 GHz, model M2V-82N-5JX is a high-dynamic-range in-phase/quadrature (I/Q) vector modulator with 360-deg. control for generating complex digital modulation in communications systems. Based on PIN diode technology, the compact modulator has switching speed o 350 ns. It features a 50-dB dynamic range and achieves simultaneous phase and amplitude control. The phase is accurate to +/-10 deg. while the amplitude is flat within +/-0.75 dB. The modulator can handle input levels to +15 dBm CW, and 1 W maximum on peaks. VSWR is better than 1.80:1. The modulator is designed for +/- 15-VDC supplies and measures 3.25 x 3.00 x 1.00 inches. For more information on the I/Q modulator, visit the G. T. Microwave web site at: http://www.gtmicrowave.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.