Surface-Mount Mixers Translate 6 To 34 GHz

Feb. 27, 2007
A pair of surface-mount MMIC mixers from Hittite Microwave covers the range from 6 to 34 GHz. Model HMC144LH5 is a double-balanced mixer with an RF range from 6 to 20 GHz and intermediate-frequency (IF) bandwidth of DC to 3 GHz. It achieves as much as 35 ...

A pair of surface-mount MMIC mixers from Hittite Microwave covers the range from 6 to 34 GHz. Model HMC144LH5 is a double-balanced mixer with an RF range from 6 to 20 GHz and intermediate-frequency (IF) bandwidth of DC to 3 GHz. It achieves as much as 35 dB LO-to-RF isolatioin with an input third-order intercept point of +24 dBm. Model HMC338LC3B is a subharmonic mixer that operates from 24 to 34 GHz with an integrated LO amplifier. It has an IF range of DC to 3 GHz with 2LO-to-RF isolation of 40 dB. With the integral amplifier, it requires only -5-dBm LO drive and consumes only 30 mA current from a +3-VDC supply. For more information on the broadband MMIC mixers, visit the Hittite Microwave website at http://www.hittite.com.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...