Log Detector Operates To 10 GHz

Sept. 18, 2007
Hittite Microwave has developed the model HMC611LP4(E) logarithmic detector/controller for coverage of the 1-MHz-to-10-GHz range. The detector, which converts an RF input power level to a proportional output DC voltage, features a dynamic range of better ...

Hittite Microwave has developed the model HMC611LP4(E) logarithmic detector/controller for coverage of the 1-MHz-to-10-GHz range. The detector, which converts an RF input power level to a proportional output DC voltage, features a dynamic range of better than 6- dB through 5.8 GHz and 54 dB through 8 GHz with 1-dB detector error over temperature. It features a nominal log slope of 25 mV/dB and nominal third-order intercept point of +12 dBm to 5.8 GHz. The 50-ohm log detector/controller draws 106 mA from a +5-VDC supply. For more information, visit the Hittite Microwave website at: http://hittite.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...