• Resources
  • Directory
  • Webinars
  • White Papers
  • Video
  • Blogs
  • CAD Models
  • Advertise
    1. Technologies
    2. Components

    RF Power Module Boosts 1 GHz

    Oct. 2, 2007
    AR Worldwide has developed a compact RF power module for use in commercial and military systems. Model KMW1090 provides 30 W of Class A power from 20 to 1000 MHz with 46 dB minimum gain. The 50-ohm amplifier module draws 5.6 A from a +28-VDC supply and ...

    AR Worldwide has developed a compact RF power module for use in commercial and military systems. Model KMW1090 provides 30 W of Class A power from 20 to 1000 MHz with 46 dB minimum gain. The 50-ohm amplifier module draws 5.6 A from a +28-VDC supply and achieves 10 dB typical noise figure and -40 dBc typical harmonics. It is supplied with SMA female connectors. For more, visit the site at: http://www.ar-worldwide.com

    Continue Reading

    Sponsored Recommendations

    Guide to VNA Automation in MATLAB Using the TCP Interface

    April 19, 2024
    In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

    In-Circuit Antenna Verification

    April 19, 2024
    In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

    UHF to mmWave Cavity Filter Solutions

    April 12, 2024
    Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

    Wideband MMIC Variable Gain Amplifier

    April 12, 2024
    The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...