Markets

90-nm CMOS Module Advances Mobile WiMAX

March 12, 2008

By leveraging 90-nm CMOS technology, a 15-x-15-mm RF module is able to integrate an RF integrated circuit (RF IC), antenna switches, power amplifier, filters, and oscillator circuit. In doing so, it promises to reduce the form factor of mobile WiMAX devices. The 94-pin MB86K71 operates from three voltages: 1.2, 2.925, and 3.3 V. It covers the 2.496-to-2.69-GHz band. Bandwidth is 5 and 10 MHz. For wireless access, the module relies on 512/1024 Fast Fourier Transform (FFT) orthogonal frequency division multiple access (OFDMA). Its modulation methods are 64 and 16 quadrature amplitude modulation (QAM) and quadrature phase shift keying (QPSK). This module supports multiple-input multiple-output (MIMO). in addition, it supports the WiMAX Forum's Wave 2 specifications. The 2-x-2 STC/MIMO antenna, which supports Matrix A and B, flaunts impedance of 50 Ω. The MB86K71 is now sampling for a price of 5000 yen. Fujitsu.

See figure

Ltd., Shiodome City Center, 1-5-2 Higashi-Shimbashi, Minato-ku, Tokyo 105-7123; +81-3-5322-3381, Internet: www.fujitsu.com.

About the Author

Nancy Friedrich | RF Product Marketing Manager for Aerospace Defense, Keysight Technologies

Nancy Friedrich is RF Product Marketing Manager for Aerospace Defense at Keysight Technologies. Nancy Friedrich started a career in engineering media about two decades ago with a stint editing copy and writing news for Electronic Design. A few years later, she began writing full time as technology editor at Wireless Systems Design. In 2005, Nancy was named editor-in-chief of Microwaves & RF, a position she held (along with other positions as group content head) until 2018. Nancy then moved to a position at UBM, where she was editor-in-chief of Design News and content director for tradeshows including DesignCon, ESC, and the Smart Manufacturing shows.