Femtocell Reference Platform Is Under Development

Feb. 19, 2010
GUILDFORD, ENGLANDA flexible, high-performance reference platform for femtocell designs is being developed through a collaboration between Lime Microsystems and Percello. The platform combines Percello's PRC6xxx baseband IC with Lime's multiband, ...

GUILDFORD, ENGLANDA flexible, high-performance reference platform for femtocell designs is being developed through a collaboration between Lime Microsystems and Percello. The platform combines Percello's PRC6xxx baseband IC with Lime's multiband, multi-standard RF transceiver IC, the LMS6002. It will be used to develop femtocell designs for high-data-rate UMTS/HSPA+ air interfaces.

The PRC6xxx IC from Percello is a baseband processor for third-generation (3G) femtocells. It supports up to 16 simultaneous CS/PS/HSPA calls with throughput of 21.6/5.76 Mb/s HSPA+ data rates. It also supports extended cell range for enterprise and outdoor applications. The IC has the ability to cascade two or more PRC6xxx ICs to support 32 and 64 simultaneous users.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...