Anritsu Analyzers Aim at TETRA Systems

July 31, 2007
Anritsu Company has released the S311D/S312D Site Master cable and antenna analyzers with a frequency range of 2 to 1600 MHz and the measurement capabilities to tackle P25 and TETRA radio testing. The testers are ideal for evaluating components and ...

Anritsu Company has released the S311D/S312D Site Master cable and antenna analyzers with a frequency range of 2 to 1600 MHz and the measurement capabilities to tackle P25 and TETRA radio testing. The testers are ideal for evaluating components and systems for Land Mobile Radio (LMR) and Public Safety applications. The S312D includes a cable and antenna analyzer, a spectrum analyzer, interference analyzer, channel scanner, received signal strength indication (RSSI) meter, AM/FM demodulators, and RF power meter. The noise floor is -135 dBm. An accurate power meter with 6-GHz true RMS sensor is available as an option. For more information, visit the Anritsu website at: http://www.us.anritsu.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.