Mwrf 11429 Ups
Mwrf 11429 Ups
Mwrf 11429 Ups
Mwrf 11429 Ups
Mwrf 11429 Ups

Rugged DC-DC Power Supplies for Embedded Computing

Aug. 6, 2019
Diamond Systems' JMM-7000 family of dc-dc power supplies feature multiple output options, and transient and brownout protection.

The JMM-7000 family of dc-dc power supplies is Diamond Systems' most recent series of highly configurable, low-power embedded-computing dc-dc power-supply solutions. The family has a large number of available models and military configurations, including 25- or 40-W power, and isolation/non-isolation options, says the company.

Integrated UPS backup options are available on all military models along with energy packs that have been designed for the JMM-7000 family. Backup energy is provided to maintain stable system operation in case of power interruption.

The new dc-dc power supplies raise the bar on critical power advances, including protection (transient, brownout, and reverse polarity), overall available power options, and configurability.

Features

  • Multiple output options:
    • 12-V dc output, 40 W with or without 500-V dc isolation
    • 5-V dc output, 25 W without isolation / 40 W with 500-V dc isolation
    • Dual 5-V + 12-V output option, 40 W with isolation
  • EMI compatibility to MIL-STD-461C/D/E/F and DO-160C/D/E/F/G requirements
  • Input immunity per MIL-STD704A/D/E/F, MIL-STD-1275A/B, and DO-160 cat A, B, and Z
  • Transient protection: 100 V dc/50 ms, 600 V dc/20 μs spikes
  • Brownout protection: 6 V dc/1 sec
  • Reverse-polarity protection
  • Designed to meet MIL-STD-810G shock/vibration specifications (large components epoxied to PCB)
  • Integrated UPS backup system using high-efficiency supercapacitor energy packs (standard or custom)
  • Built-in microcontroller provides real-time status of power-supply and backup energy bank
  • 3.55 x 3.775 inches (90 x 96 mm) PC/104 form factor (no bus connectors)
  • -40 to +85°C operating temperature
  • ACC-HS104-12.7 heat sink accessory

SEP-7000 Energy Packs

PC/104-sized supercapacitor energy packs have been designed for use with JMM-7000 power supplies (with UPS option) and provide up to 3300 J (watt-sec) of backup energy to maintain stable system operation in case of power interruption. SEP-7000 energy packs are available in two capacities and two configurations (cable connect and plug-on direct mount).

For more information, read or download Diamond Systems' recent white paper, Designing Embedded Computers for Rugged Applications.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...