SMT Divider Clocks To 28 GHz

Jan. 21, 2010
Model HMC791LC4B from Hittite Microwave is a surface-mount frequency divider with simultaneous divide-by-2 and divide-by-4 outputs, with capability to handle clock input signals to 28 GHz. Input signals are terminated with 50 Ohms to ground on-chip and ...

Model HMC791LC4B from Hittite Microwave is a surface-mount frequency divider with simultaneous divide-by-2 and divide-by-4 outputs, with capability to handle clock input signals to 28 GHz. Input signals are terminated with 50 Ohms to ground on-chip and may be either AC or DC coupled. Outputs can be differential or single-ended with peak-to-peak drive levels to 600 mV. The divider exhibits single-sideband (SSB) phase noise of -151 dBc/Hz with typical rise and fall times of 12 and 14 ps, respectively. It is supplied in a RoHS-compliant 4 x 4 mm ceramic surface-mount-technology (SMT) package and draws only 200 mA from a single -+3.3-VDC supply.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...