Switches Handle DC To 12.4 GHz

April 6, 2012
 

The 2N and 2NH Series of single-pole, double-throw (SPDT) switches are designed for signal-control applications from DC to 12.4 GHz. The break-before-make, 50-Ω switches are supplied with high-power Type N connectors for large-signal use, and are rated for operating lifetimes of 1 million switching cycles or more. The switches weigh 8.5 oz. and are designed for ambient operating temperatures from –55 to +85ºC. Both switch series are available with failsafe, latching self cut-off, or pulse latching functions.

DuCommun LaBarge Technologies
23301 Wilmington Ave.
Carson, CA 90745
(310) 513-7200
FAX: (310) 513-0206

Sponsored Recommendations

Wideband MMIC LNA with Bypass

June 6, 2024
Mini-Circuits’ TSY-83LN+ wideband, MMIC LNA incorporates a bypass mode feature to extend system dynamic range. This model operates from 0.4 to 8 GHz and achieves an industry leading...

Expanded Thin-Film Filter Selection

June 6, 2024
Mini-Circuits has expanded our line of thin-film filter topologies to address a wider variety of applications and requirements. Low pass and band pass architectures are available...

Mini-Circuits CEO Jin Bains Presents: The RF Engine of the 21st Century

June 6, 2024
In case you missed Jin Bains' inspiring keynote talk at the inaugural IEEE MTT-S World Microwave Congress last week, be sure to check out the session recording, now available ...

Selecting VCOs for Clock Timing Circuits A System Perspective

May 9, 2024
Clock Timing, Phase Noise and Bit Error Rate (BER) Timing is critical in digital systems, especially in electronic systems that feature high-speed data converters and high-resolution...