LNA Spans 1 To 40 GHz

Dec. 9, 2010
With a long model number and even broader bandwidth, model PEC-42-1G40G-20-12-292MM from PMI is a low-noise amplifier (LNA) with 42-dB gain and low noise figure across the frequency range from 1 to 40 GHz. It features a noise figure of 4.6 dB at 12 GHz ...

With a long model number and even broader bandwidth, model PEC-42-1G40G-20-12-292MM from PMI is a low-noise amplifier (LNA) with 42-dB gain and low noise figure across the frequency range from 1 to 40 GHz. It features a noise figure of 4.6 dB at 12 GHz and gain flatness of +/-2.5 dB across the full bandwidth. The LNA delivers typical output power of +20 dBm at 1-dB compression. It operates from a single +12-VDC supply and is equipped with 2.92-mm connectors. The LNA measures 1.37 x 1.0 x 0.6 in.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...