Power Divider Splits DC To 18 GHz

June 4, 2009
Model 20RP06018-XXX is a two-way power divider from XMA Corporation rated for 2 W input power from DC to 18 GHz. It exhibits insertion loss of 1.5 dB above the nominal 3-dB power-division split with excellent amplitude and phase tracking performance ...

Model 20RP06018-XXX is a two-way power divider from XMA Corporation rated for 2 W input power from DC to 18 GHz. It exhibits insertion loss of 1.5 dB above the nominal 3-dB power-division split with excellent amplitude and phase tracking performance between ports. It is supplied with various combinations of male and female SMA connectors as needed and is also available in a 6-GHz version for WiMAX applications.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.