Directional Coupler Scales 5 To 50 GHz

May 4, 2011
Model CS20-54-435/4 is an extremely broadband directional coupler from Pulsar Microwave that is ideal for measurement and electronic-warfare (EW) applications from 6 to 50 GHz. Over that frequency range, it features 20 dB coupling, with coupling flatness ...

Model CS20-54-435/4 is an extremely broadband directional coupler from Pulsar Microwave that is ideal for measurement and electronic-warfare (EW) applications from 6 to 50 GHz. Over that frequency range, it features 20 dB coupling, with coupling flatness of 1 dB. The insertion loss is only 1.6 dB over the full bandwidth with directivity of better than 10 dB. The maximum VSWR is 2.0:1. The compact coupler measures 1.06 x 0.625 x 0.40 in. and is supplied with 2.4-mm connectors.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...