• Resources
  • Directory
  • Webinars
  • White Papers
  • Video
  • Blogs
  • CAD Models
  • Advertise
    1. Content

    Combiner Covers Dual Bands

    Oct. 28, 2010
    Model AD2067-2475C106 from AMCrf is a rugged power combiner with a frequency range of 2025.5 to 2109.5 MHz in band one and 2450 to 2500 MHz in band two. The insertion loss for either band is 1 dB or less, while the return loss for band 1 or 2 is 14 dB ...

    Model AD2067-2475C106 from AMCrf is a rugged power combiner with a frequency range of 2025.5 to 2109.5 MHz in band one and 2450 to 2500 MHz in band two. The insertion loss for either band is 1 dB or less, while the return loss for band 1 or 2 is 14 dB or better. The 50-Ohm power combiner is supplied with female SMA connectors and can handle total power levels to 12 W.

    Continue Reading

    Sponsored Recommendations

    In-Circuit Antenna Verification

    April 19, 2024
    In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

    UHF to mmWave Cavity Filter Solutions

    April 12, 2024
    Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

    Wideband MMIC Variable Gain Amplifier

    April 12, 2024
    The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

    Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

    April 12, 2024
    While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...