OCVCXO Designed For Heavy Vibration

Nov. 12, 2009
Model NV45AD1725 is an oven-controlled, voltage-controlled crystal oscillator (OCVCXO) from Bliley Technologies that provides 100 MHz with thermal stability of +/-50 PPB. It provides low-gravitational-force sensitivity with rating of 5 x 10-10 per g/axis ...

Model NV45AD1725 is an oven-controlled, voltage-controlled crystal oscillator (OCVCXO) from Bliley Technologies that provides 100 MHz with thermal stability of +/-50 PPB. It provides low-gravitational-force sensitivity with rating of 5 x 10-10 per g/axis and is ideal for high-frequency systems subject to high vibration and harsh environmental effects. The oscillator holds harmonics to -30 dBc and spurious levels to no more than -80 dBc. Available in several options, the phase noise is as good as -100 dBc/Hz offset 10 Hz from the carrier and -155 dBc/Hz offset 1 kHz from the carrier. The OCVCXO is available in leaded and RoHS versions and measures 1.00 x 1.00 x 0.46 in. It is ideal for microwave communication, radar, and navigation systems.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.