8-GHz YIGs Fit TO-8 Cans

June 24, 2010
A series of miniature YIG-tuned oscillators from Micro Lambda Wireless is housed in tiny TO-8 packages for applications from 2 to 8 GHz. Compatible with printed-circuit-board (PCB) mounting, the oscillators are based on permanent magnets and low-noise ...

A series of miniature YIG-tuned oscillators from Micro Lambda Wireless is housed in tiny TO-8 packages for applications from 2 to 8 GHz. Compatible with printed-circuit-board (PCB) mounting, the oscillators are based on permanent magnets and low-noise silicon germanium (SiGe) transistors. The oscillators are supplied in cylindrical packages with 0.675-in. diameter and heights of 0.27, 0.35, or 0.50 in. They deliver +10 dBm typical output power with phase noise of -100 dBc/Hz offset 10 kHz from the carrier and -125 dBc/Hz offset 100 kHz from the carrier. For additional information on these tiny YIG oscillators, don't miss the exclusive Cover Feature story in the June 2010 issue of Microwaves & RF.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.