Amplifiers Team For 2-To-18-GHz Span

Oct. 22, 2009
Offering a pair of amplifiers for full EW-band applications from 2 to 18 GHz, Keragis Corporation showed AOC visitors its model KHPA-0206 100-W, 2-to-6-GHz amplifier and its model KHPA-0618 100-W, 6-to-18-GHz amplifier. Both rack-mountable units offer ...

Offering a pair of amplifiers for full EW-band applications from 2 to 18 GHz, Keragis Corporation showed AOC visitors its model KHPA-0206 100-W, 2-to-6-GHz amplifier and its model KHPA-0618 100-W, 6-to-18-GHz amplifier. Both rack-mountable units offer 60-dB minimum gain with typical noise figure of 5 dB and input/output VSWR of less than 2.0:1. They can operate under Universal Serial Bus (USB) remote control for switching purposes and are supplied with Type N female connectors.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.