Limiting Amplifiers Cover 0.1 To 18 GHz

May 24, 2010
In addition to its lines of low-noise, medium-power, and cryogenically cooled low-noise amplifiers, AmpliTech will be touting its lines of high-performance limiting amplifiers at booths 3030 and 3031 at the 2010 IMS in Anaheim this week. Designed for ...

In addition to its lines of low-noise, medium-power, and cryogenically cooled low-noise amplifiers, AmpliTech will be touting its lines of high-performance limiting amplifiers at booths 3030 and 3031 at the 2010 IMS in Anaheim this week. Designed for applications in detector log-video amplifiers (DLVAs) and instantaneous-frequency-measurement (IFM) systems, these limiting amplifiers provide constant output levels even when the input signal level is changing in amplitude. Available with as much as 80 dB gain and with bandwidths as wide as 2 to 18 GHz, the limiting amplifiers have noise figures as low as 1.5 dB in a 0.5-to-1.0-GHz unit to 5 dB in several 2-to-18-GHz units.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.