VCO Tunes From 960 To 1080 MHz

Nov. 11, 2010
Designed to tune from 960 to 1080 MHz with tuning voltages of 0.5 to 4.5 V, model CLV1020A-LF is a voltage-controlled oscillator (VCO) from Z-Communications with linear tuning characteristics and low phase noise. The oscillator features phase noise of ...

Designed to tune from 960 to 1080 MHz with tuning voltages of 0.5 to 4.5 V, model CLV1020A-LF is a voltage-controlled oscillator (VCO) from Z-Communications with linear tuning characteristics and low phase noise. The oscillator features phase noise of typically +106 dBc/Hz offset 10 kHz from the carrier with typical tuning sensitivity of 40 MHz/V. It delivers +2 dBm output power at 20 mA and +5 VDC and exhibits typical second harmonics of -15 dBc. The RoHS-compliant source is supplied in the firm's standard MINI-14S package measuring 0.5 in. x 0.5 in. x 0.22 in. Model CLV1020A-LF is well suited for satellite communication and fixed wireless applications.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...