WAMICON Visits Florida Next April

Nov. 5, 2009
The 11th gathering of the IEEE Wireless and Microwave Technology Conference (WAMICON) is scheduled for next April 12-13, 2010 in Melbourne, FL. It is sponsored by the IEEE's Microwave Theory & Techniques (MTT) Society, with technical co-sponsorship from ...

The 11th gathering of the IEEE Wireless and Microwave Technology Conference (WAMICON) is scheduled for next April 12-13, 2010 in Melbourne, FL. It is sponsored by the IEEE's Microwave Theory & Techniques (MTT) Society, with technical co-sponsorship from the Electron Devices and Communications Societies. The conference is set to address interdisciplinary aspects of wireless and RF technology and will include oral presentations, poster presentations, and five tutorials. The tutorials will cover a range of topics including modern radio fundamentals, power amplifier design approaches, and filter design techniques. Tutorial presenters include Dr. James Komiak, Dr. Richard Snyder, and Professors Paul Tasker, Fadhel Ghannouchi, and Michael Steer. The conference is slated to offer about 70 technical presentations. Exhibit and sponsorship opportunities are available.

Continue Reading

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

New

Most Read

Sponsored