Compact YIGs Tune To 9 GHz

Jan. 11, 2011
Several YIG-tuned products have been announced by Raditek as more compact replacements for the company's earlier YIG products, now supplied in a 1 x 1 in. package that is only 20 mm high. The new products include a pair of YIG oscillators that tune from ...

Several YIG-tuned products have been announced by Raditek as more compact replacements for the company's earlier YIG products, now supplied in a 1 x 1 in. package that is only 20 mm high. The new products include a pair of YIG oscillators that tune from 3.8 to 7.0 GHz and from 3.95 to 9.00 GHz with at least +13 dBm output power and spurious products controlled to -70 dBc or better. The oscillators feature +/-0.1-percent tuning linearity and a frequency-modulation (FM) coil with sensitivity of 150 kHz/mA. The oscillators draw typically 100 mA current from a +8.5-VDC voltage supply. The phase noise is around -103 to -105 dBc/Hz offset 10 kHz from the carrier.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.