C-Band Synthesizer Maintains Low Noise

June 17, 2010
Model SFS6400A-LF is a C-band frequency synthesizer from Z-Communications designed for operation at 6.4 GHz. It delivers +6 dBm output power with a voltage-controlled-oscillator (VCO) supply of 40 mA and +5 VDC. It runs with phase-lock-loop (PLL) voltage ...

Model SFS6400A-LF is a C-band frequency synthesizer from Z-Communications designed for operation at 6.4 GHz. It delivers +6 dBm output power with a voltage-controlled-oscillator (VCO) supply of 40 mA and +5 VDC. It runs with phase-lock-loop (PLL) voltage of +3 VDC and 11 mA typical current. Spurious content is controlled to -65 dBc and harmonics to -20 dBc while phase noise is typically -88 dBc/Hz offset 10 kHz from the carrier. The frequency synthesizer is supplied in the firm's PLL-V-12N package measuring 0.60 x 0.60 x 0.13 in. It is available in tape-and-reel packaging for automated assembly production.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.