Mwrf 286 Fig01 4 1

Driver Amp Serves 30 To 4000 MHz

June 13, 2012
Suitable for military communications and commercial communications infrastructure applications, model MAAM-010617 is an RF driver amplifier with a frequency range of 30 to 4000 MHz. It offers 13-dB gain over that span, with 4.5-dB noise figure. The ...
Suitable for military communications and commercial communications infrastructure applications, model MAAM-010617 is an RF driver amplifier with a frequency range of 30 to 4000 MHz. It offers 13-dB gain over that span, with 4.5-dB noise figure. The driver amplifier, which is supplied in an SOT-89 package, exhibits 18-dB input and output return loss. Designed for a single +5-VDC supply, it draws 420 mA quiescent current. The amplifier achieves +31 dBm output power at 1-dB compression with a +42.5-dBm third-order intercept point.

M/A-COM Technology Solutions, Inc.
100 Chelmsford St.
Lowell, MA 01851
(978) 656-2507
FAX: (978) 656-2644
www.macomtech.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.