Linear Amplifier Boosts 2 To 6 GHz

June 25, 2009
Model MMA-020624-L3 from MWT Inc. is a high-linearity GaAs MESFET MMIC amplifier for applications from 2 to 6 GHz. It features minimum gain of 15 dB and typical gain of 17 dB across that range, with +25 dBm output power at 1-dB compression and +40 dBm ...

Model MMA-020624-L3 from MWT Inc. is a high-linearity GaAs MESFET MMIC amplifier for applications from 2 to 6 GHz. It features minimum gain of 15 dB and typical gain of 17 dB across that range, with +25 dBm output power at 1-dB compression and +40 dBm output power at 3-dB compression. The noise figure is typically 3.5 dB. The amplifier provides 18 dBm output power at 2 percent error vector magnitude (EVM). Input and output return loss are 12 dB. The high-dynamic-range amplifier is supplied in a LCC lead-frame package.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...